GreenIce Concrete
Cure & Profile System
“Making your Concrete Performance Ready”
Green Umbrella® GreenIce Cure & Profile™ System is primarily an interior @EarlyAge integral concrete cure. This starts part utilizes a cure IceStart™, during finishing and fixative, IceStop™. The GreenIce Cure & Profile™ System creates a highly consolidated and refined surface that is the basis for an unconventional floor at the same time it promotes best concrete practice, improving edges and ff/fl numbers. With a unique liquid abrasive cutting agent, GreenCut™ and the variety of GC abrasives line, BigStock™, GC-X™ Fusion™, Eraser™ and PolishPlus™ cover any class of profile including an unconventional highly reflective polish. Advancing construction staging allows mechanical profile, hone and polish to be performed days after placement, not months— with the use of a conventional grinder or a fitted finishing trowel. Combining the profile system of MaxDefense™: DryShield™, a densifier. Shield & Enhance™, a salt protection. Interior Microfilm™, a repairable wear-guard that brings the hardness, density, abrasion resistance, ultimate stain resistance in the industry. All while retaining the maximum amount of moisture within the concrete during curing for an unconventional architectural concrete floor that is truly performance-ready.
System Value Statement
GreenIce Cure & Profile System
-
HIGH-PERFORMANCE CONCRETE
-
PROMOTING BEST CONCRETE PRACTICE
-
CURE AND DENSIFICATION BENEFITS @Day of Placement
-
CONSTRUCTION STAGING @EarlyAge
-
PLACEMENT IMPERFECTIONS REMOVED
-
OPTIONAL CLASS OF PROFILE
-
OPTIONAL UNCONVENTIONAL POLISHED GLASS APPEARANCE
Why Green Umbrella GreenIce and Profile System?
GreenIce Cure System™, creates a concrete slab with a surface that looks like ice! The process begins with our two-part curing products IceStart and IceStop. These unique curing agents are specially designed to work with the concrete trowel to reduce or eliminate common problems flatwork finishers face.
With our third product, Green Umbrella RTU Microfilm, you can achieve the same slip-resistant ice-like, brilliant finish as would a Grind Hone and Polish floor specified for many big box stores and warehouses.
All of this is accomplished with less labor, less downtime and less environmental impact. The GreenIce Concrete Cure & Polish System gives concrete floors the look and clarity of a fresh sheet of ice over a concrete slab while being slip-resistant.
Polished concrete properties without polishing
GreenICe Cure and polish
Features & Benefits
- Ease of finishing, eliminates false set
- Reduces drag on the concrete, meets slip resistance standard
- Reduces subsurface lateral microcracking
- Remove cat faces
- Extends workability in hot weather
- Does not extend set times in cold weather
- Allows finishing of dry shake as if it is normal concrete
- Looks like a mechanically polished (PHP) floor
- Better protection than found on mechanically finished floors
- Opens new markets for flat-work contractors
Cut Your Labor
Achieve the properties of a polished concrete floor during the normal pour and finish, with no additional labor.
Cut Your Downtime
Is applied same day as pour and finish, at the same time.
Cut Your Environmental Impact
Reduces construction waste and all products are water-based and environmentally friendly.
Green Umbrella GreenIce Systems
Cutting Downtime
On any given slab you have several different options. This example illustrated is of a 20,000 square foot project.
One is traditional polished concrete. After the placement and finish, the contractor waits for the slab to cure before they can start the polishing process. A second option is the Green Umbrella Max Defense system. Using GreenCut, a cutting agent cuts days off the schedule. GreenICE Cure+Profile cuts weeks off the schedule. in 72 hours a floor is placed, finished and polished resulting in a floor of equal or superior quality.
GreenIce Product Reduction Chart
CUT YOUR ENVIRONMENTAL IMPACT
Concrete Canvas System uses fewer products to achieve a superior product
Product Reduction
GrenIce Cure & Profile
Conventional Slab
| GREENICE CURE & POLISH PRODUCT REDUCTION CHART | ||
|---|---|---|
| Cut your Products Specified | ||
| Green Umbrella 3 | ||
| // Conventional Slab: 4-8 | ||
| Concrete Product | GreenIce Cure & Polish | Product to Specify |
| Products to Support Water Cure | Not Required | Optional |
| Finishing Aid | ✔️ | IceStart & IceStop |
| Shake-On Hardener | ✔️ | “ |
| Cure & Seal | ✔️ | “ |
| Liquid Densifer | ✔️ | “ |
| LIiquid Hardener /Dust-proofer | ✔️ | “ |
| Sealer & Stain Protectant | ✔️ | IceCap |
| Surface Imperfections Reduced (4 Abrasives) | ✔️ | 1-2 GreenCut Abrasives |
| Aggregate Exposure (5-6 Abrasives) | Optional | 2-3 GreenCut Abrasives |
| Unconventional High Gloss Appearance | Optional | 2-3 GreenCut Abrasives |
| (Not Possible) | ||
Versatile Applications of Canvas Control
View Our Work
GreenIce Cure & Polish
Product Download
Message Us
Request a product specification for your next project.
” Make The Complex Simple “
Green Umbrella GreenIce Systems
